Electronics Trading Company in Saudi Arabia 2026

Electronics Trading Company in Saudi Arabia 2026

Electronics Trading Company in Saudi Arabia 2026

An electronics and mobile phone trading company in Saudi Arabia needs a Saudi entity whose commercial registration carries the device trading activity, a SASO-accepted Type 1a conformity certificate for every model it sells, and a CST type approval before any device is imported or offered for sale. A 100 percent foreign-owned trading company also needs SAR 30 million in capital and a presence in at least 3 regional or global markets, while phones, laptops, tablets and smart watches need an IECEE certificate on top.

This guide is for distributors, brand importers and regional resellers of phones, laptops, accessories, routers and other connected devices who want to sell in the Kingdom through their own company rather than through an agent’s licence. The entity comes before any product file: device approvals are issued to a supplier with a commercial registration in Saudi Arabia that names the import and sale of communications devices, so the registration has to be right before any model goes on SABER. Everything below was read on the official sources on 10 November 2026: the Saudi Standards, Metrology and Quality Organization (SASO) Technical Regulation for Communications and Information Technology Devices, the Implementing Regulations of the Telecommunications and Information Technology Law published by the Communications, Space and Technology Commission (CST), SASO’s hazardous-substances guide and the Ministry of Investment (MISA) Investor Guide, 13th edition.

Foreign ownership rules for an electronics trading company

Selling devices wholesale or retail is a commercial activity, and MISA treats 100 percent foreign-owned trading differently from services or manufacturing. Section 5.1.1 of the Investor Guide, re-read on misa.gov.sa today, sets the thresholds below. They decide your structure before anything else in this guide.

Ownership route Minimum capital (SAR) Minimum Saudi participation Extra conditions
Commercial activity with a Saudi partner 26,666,667 25% None listed in section 5.1.1
Commercial activity, 100% foreign 30,000,000 None Presence in at least 3 regional or global markets
100% foreign: investment commitment (option 1) SAR 300 million over 5 years, including the SAR 30 million cash capital None Localisation rates set by MHRSD, a plan for Saudis in senior management, 30% of Saudi staff trained a year
100% foreign: investment commitment (option 2) SAR 200 million over 5 years, including the SAR 30 million cash capital None Plus one of: 30% of locally sold products made in the Kingdom, 5% of sales to local R&D, or a unified logistics and after-sales centre

For most device distributors the practical question is therefore which of three routes fits. A group with the scale and the multi-market footprint can register a fully foreign-owned trading company under the 30 million rule. A group without that scale usually structures with a Saudi partner holding at least 25 percent, or supplies the market through a Saudi distributor while it builds volume. A GCC-owned company is treated differently again, because GCC nationals and companies wholly owned by them are generally treated as local investors; confirm the treatment of your shareholding at registration. Investment registration itself is notified by MISA within 10 working days of a complete file, and the annual update replaces the old renewal. Our MISA license guide covers that step in detail.

One distinction matters for telecom groups. The same MISA table lists communications activities separately, with a minimum Saudi participation of 40 percent. If your plan goes beyond selling devices into providing communications services, that row applies to those activities, so describe each activity precisely when you register and let the classification follow the business you will actually run.

Who regulates devices in the Kingdom

Three authorities touch every phone, laptop or router that a trading company sells, and they work from one regulation.

  • CST (Communications, Space and Technology Commission) sets the technical specifications for communications and IT devices and approves devices for use. Article 89 of the Implementing Regulations of the Telecommunications and Information Technology Law states that no person shall manufacture, import, distribute, rent, sell or offer for sale such devices unless they are approved and compatible with CST’s standards, and that the applicant tests through a laboratory or entity approved by CST, inside or outside the Kingdom, at its own cost. Article 90 lets CST require an approval label on licensed devices and requires CST to publish a list of approved devices.
  • SASO issued the Technical Regulation for Communications and Information Technology Devices under an agreement with CST. SASO’s register shows it approved on 28 December 2023 and published on 16 August 2024. It defines the supplier, the conformity route, the technical file and the labelling rules.
  • ZATCA and the market surveillance authorities enforce at the border and in the market. Customs checks that each shipment carries its certificates, and inspectors may sample devices from shops and warehouses at any time.

The Ministry of Commerce sits behind all of this as the authority for your commercial registration and for the Anti-Commercial Fraud Law, whose penalties the SASO regulation applies to non-conforming products.

What “supplier” means, and why it is your company

The SASO regulation places every obligation on the supplier. Its definition covers the manufacturer if established in the Kingdom, the manufacturer’s agent in the Kingdom where the manufacturer is abroad, or the importer where there is no agent, plus anyone in the supply chain whose activity can affect the product’s characteristics. In practice, when your Saudi company imports a brand’s devices and no Saudi agent of that brand exists, your company is the supplier and carries full legal responsibility under Article 10.

That has three consequences a trading plan has to absorb:

  • The conformity certificate and technical file are applied for in your company’s name, so the account on SABER is yours.
  • Article 10 requires every supplier to keep records of who supplied each device to it and to whom it supplied the device, for at least 10 years, and to show them to inspectors on request.
  • If a product is found non-conforming, the cost of testing, withdrawal, recall or destruction falls on the supplier.

The conformity route: Type 1a certificate and technical file

Article 6 of the SASO regulation requires the supplier to obtain a conformity certificate from a conformity assessment body accepted by SASO, under the Type 1a scheme of ISO/IEC 17067, which is a type approval: a representative sample of each model is tested against the Saudi standards listed in Annex 1. Those standards start with SASO-CITC-GEN001 (general requirements), GEN002 (requirements for specific ICT equipment) and GEN003 (radio modules), followed by product standards for VoIP equipment, fibre optics, USB charging and many more.

Each product must be accompanied by a technical file. The regulation lists its contents:

  1. The supplier’s declaration of conformity, on the form in Annex 5.
  2. A risk assessment document.
  3. A general description of the device: how it works and its intended use, photographs or drawings of external features, markings and internal layout, installed software that affects compliance, user and installation instructions, the frequency bands it supports with the maximum output power in each band, and the encryption systems built into it.
  4. Design or manufacturing drawings, component and sub-assembly diagrams and circuits.
  5. The explanations needed to understand those drawings and the device’s operation.

Two rules catch traders who sell many variants. A certificate stops covering a model as soon as the product is modified during its validity (cosmetic changes aside), so a new hardware revision means a new application. And wireless devices must be built so that a software download or update does not undo the conformity already granted.

Devices that also need an IECEE certificate

Article 6.2 adds a national recognition certificate under the IECEE system of the International Electrotechnical Commission for the products in Annex 3, and the IECEE certificate must cover all requirements of the regulation. These are the product families most electronics traders sell:

# Annex 3 product family Includes
1 Mobile phones and accessories Wired and wireless chargers, car chargers, wireless earphones for phones
2 Laptops, tablets and accessories Laptop and tablet chargers
3 Smart watches All models
4 Televisions and display screens All models
5 Video game consoles and accessories Controllers, wireless headsets, chargers
6 Mobile phone charging cables All cables
7 Desktop computers (PC) All models

A distributor that plans a range of phones plus own-brand chargers and cables therefore budgets for Type 1a certificates and IECEE certificates across most of the catalogue, not just the handsets.

USB Type-C charging: the dates that apply now

Annex 2 of the regulation unifies chargers on USB Type-C in two phases. Phase one has applied since 1 January 2025 to mobile phones, digital cameras, wireless earbuds, e-readers, handheld game consoles, headsets, headphones, keyboards, mice, portable navigation systems, portable speakers, tablets and wireless routers. Phase two has applied to laptops since 1 April 2026.

  • The device’s charging port must be USB Type-C, and it must charge with a USB Type-C cable.
  • If it can charge by cable above 5 volts, 3 amps or 15 watts, it must support full USB Power Delivery whatever charger is used.
  • Smartphones and tablets sold with a charger must carry the symbol showing a charger is included; a symbol showing it is not included is optional.
  • Where a charger is included, the packaging states the minimum and maximum power the device needs to charge at full speed, and USB PD support is marked “USB PD”.

Older stock with other connectors is the commonest reason a catalogue imported from another market cannot be listed as it is.

Labelling, Arabic data and the other regulations that stack on top

Article 5 requires product data in Arabic (another language may be added, but the Arabic text prevails), and each device must clearly show the supplier’s name and details, the trademark, the manufacturer’s name and details, the model, the country of origin and usage warnings. A model, batch or serial number must identify each device, and CST’s conformity labels must appear on the device or, where it is too small, on the packaging or an accompanying document. QR codes may carry general features and extra instructions, never the mandatory data.

Device trading also sits under other SASO regulations at the same time. The regulation on Restriction of Hazardous Substances in Electrical and Electronic Equipment has applied to telecommunication and IT equipment since 31 December 2022, under SASO’s own timeline. Safety requirements in the ICT regulation itself cover electrical safety, radiation exposure, light and laser and electromagnetic compatibility, and SASO’s separate Technical Regulation for Electromagnetic Compatibility (published 17 November 2023) and the energy-efficiency requirements apply where a product falls in their scope. Your conformity body will tell you which certificates a given HS code needs; build that list per model before you price the range.

Approvals in order

The sequence below is how a foreign group gets from no presence to devices on sale. Steps 1 to 4 happen once; steps 5 to 8 repeat for every model and every shipment.

  1. Choose the structure. 100% foreign trading under the SAR 30 million rule, a Saudi partner at 25 percent or more, or a GCC-owned vehicle. This decides everything after it.
  2. MISA investment registration for the foreign shareholder, notified within 10 working days of a complete file.
  3. Trade name and commercial registration with the Ministry of Commerce. Trade name reservation is SAR 200 for an Arabic name or SAR 500 for an English one; an LLC’s registration is SAR 1,200 plus SAR 500 publication plus 15% VAT. The activity list must include the import and sale of communications and IT devices, because CST’s portal asks for that activity before it accepts a customs clearance request.
  4. Post-registration setup: ZATCA tax and customs registration, GOSI and Qiwa for staff, the municipal licence for any showroom or warehouse, and the Chamber of Commerce (no subscription for the first 3 years).
  5. Conformity certificate per model from a SASO-accepted body on SABER (Type 1a, with the technical file), plus an IECEE certificate for Annex 3 products.
  6. CST type approval for each model. CST’s equipment licensing portal states that type approval and customs clearance for ICT devices moved to the SABER platform from 12 February 2025.
  7. Shipment certificate and customs clearance for each consignment, with the product certificates linked, cleared by ZATCA at the port.
  8. Market placement: labelling checked against Article 5, supply records kept for 10 years, and product changes re-certified.

Realistic budget and timeline

Government fees for the company are set by the official schedules; conformity and testing fees are set by the accepted body and the laboratory you choose, so they vary by model and should be quoted per product before you commit to a range.

Stage Indicative cost Indicative time Source
MISA investment registration Fee determined by the ministry upon approval 10 working days from a complete file MISA Investor Guide 13th ed.
Trade name SAR 200 (Arabic) or SAR 500 (English) Online on the Saudi Business Center Ministry of Commerce
LLC commercial registration SAR 1,200 + SAR 500 publication + 15% VAT Online once the file is approved Ministry of Commerce
Chamber of Commerce SAR 0 for 3 years, then SAR 200 to 5,000 a year by class With the CR Chambers Law regulation
Type 1a certificate, IECEE, CST approval Set by the accepted body and the laboratory, per model Depends on testing; plan weeks per model Confirm on the official portal
Shipment certificate and clearance Per consignment Per shipment Confirm on SABER and ZATCA

Two calendar facts from the regulation also matter for anyone with stock already in the market: the regulation was applied within 180 days of its publication in the Official Gazette, and existing suppliers had up to 365 days from publication to bring their products into line. Both windows have passed, so every device on a Saudi shelf today is expected to comply in full.

Exhibitions, demos and samples

Trade shows are where many brands meet Saudi buyers, and Article 10 covers them. Devices without a conformity certificate may be displayed at exhibitions, conferences and similar events to show their features, provided they are clearly marked as possibly not available in the market or not usable in the Kingdom until certified. A live demonstration of a wireless device needs suitable measures and CST approval to avoid harmful interference. Plan the certification of your launch models so that what you show at an event can be sold soon after it.

Common mistakes to avoid

  • Registering the company without the device activity. CST asks for the import and sale activity on the commercial registration before customs clearance; adding it later costs an amendment and weeks.
  • Relying on certificates from another country. CST’s portal answers this directly: conformity certificates issued in other countries are not accepted on their own. Test through a laboratory or body approved for the Saudi scheme.
  • Certifying the handset and forgetting the box. Chargers, car chargers, cables and wireless earphones sit in Annex 3 and need their own IECEE certificates.
  • Importing non-Type-C stock. Phones, tablets, earbuds and routers since 1 January 2025, and laptops since 1 April 2026, must charge over USB Type-C.
  • Treating a hardware revision as the same model. Any non-cosmetic change ends the certificate’s cover for that product.
  • Keeping no supply records. The 10-year record of who supplied you and whom you supplied is an obligation, not good practice.
  • Choosing the ownership route after the product plan. The SAR 30 million rule decides whether you can own 100 percent; settle it before you sign leases or hire.

How Noble Core helps

Noble Core has set up companies for foreign investors since 2020, from offices in Riyadh and Dubai. For electronics and device traders we structure the entity (100 percent foreign, Saudi partner or GCC vehicle), prepare the MISA registration file, register the trade name and the commercial registration in Saudi Arabia with the device import and sale activity worded correctly, and complete the ZATCA, GOSI, Qiwa, municipal and Chamber steps. We coordinate with your conformity body so that the company, the SABER account and the launch models are ready in the right order. We complete the procedures on your behalf; every certificate and approval remains the decision of the competent authority. Related guides: import licence and customs in Saudi Arabia and inspection, testing and certification companies.

To discuss your product range and the right structure, message our team on WhatsApp. For the wider company picture, read our guide to company formation in Saudi Arabia, and check the regulations themselves on saso.gov.sa and misa.gov.sa.

Need help setting up in Saudi Arabia? Noble Core handles your MISA licence, commercial registration, and visas end-to-end, done right the first time.

Get a free consultation

Frequently Asked Questions

What licences does an electronics trading company in Saudi Arabia need?

You need MISA investment registration for the foreign shareholder, a commercial registration with the Ministry of Commerce that includes the import and sale of communications and IT devices, and then, for each model, a SASO-accepted Type 1a conformity certificate and CST type approval on SABER. Phones, laptops, tablets, smart watches, chargers and cables also need an IECEE certificate.

Can a foreigner own 100% of a mobile phone trading company in Saudi Arabia?

Yes, if the company meets MISA’s rule for 100 percent foreign-owned commercial activity: SAR 30 million capital, presence in at least 3 regional or global markets, and an investment commitment of SAR 300 million over 5 years, or SAR 200 million plus a localisation option. Otherwise a Saudi partner holding at least 25 percent is the usual route.

What is a Type 1a certificate for telecom devices in Saudi Arabia?

It is the conformity certificate the SASO Technical Regulation for Communications and IT Devices requires, issued by a conformity assessment body accepted by SASO under the ISO/IEC 17067 Type 1a scheme. A sample of each model is tested against the Saudi standards in Annex 1, and the certificate is backed by a technical file kept by the supplier.

Which devices need an IECEE certificate in Saudi Arabia?

Annex 3 of the SASO regulation lists mobile phones and their chargers, car chargers and wireless earphones; laptops, tablets and their chargers; smart watches; televisions and display screens; video game consoles and accessories; mobile phone charging cables; and desktop computers. The IECEE certificate must cover every requirement of the regulation, in addition to the Type 1a certificate.

Do phones sold in Saudi Arabia have to use USB Type-C?

Yes. Since 1 January 2025 mobile phones, tablets, earbuds, headphones, keyboards, mice, portable speakers, e-readers, cameras, handheld consoles, navigation systems and wireless routers must use a USB Type-C port and cable, and laptops have followed since 1 April 2026. Devices charging above 15 watts must also support USB Power Delivery.

Are conformity certificates from Europe or the UAE accepted for Saudi imports?

Not on their own. CST’s equipment licensing portal states that approval certificates issued in other countries are not accepted, and Article 89 of the telecom implementing regulations requires testing through a laboratory or entity approved by CST. Existing test reports can often support the Saudi application, which your conformity body will confirm.

Where is CST type approval for ICT devices applied for now?

CST’s equipment licensing portal states that type approval and customs clearance for communications and IT devices moved to the SABER platform from 12 February 2025. The supplier applies through its own SABER account, linking the product certificates, and then requests a shipment certificate for each consignment before ZATCA clears it at the port.

How long does it take to set up an electronics trading company in Saudi Arabia?

MISA notifies investment registration within 10 working days of a complete file, and the trade name and commercial registration follow online with the Ministry of Commerce. Product certification runs per model and depends on testing, so plan the certificates for your launch range in parallel with the company setup rather than after it.



Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *